[wpml_language_switcher type="" flags=0 native=1 translated=0][/wpml_language_switcher]

Q1® Premium Foam Masking Tape

Q1® Premium Foam Masking Tape

Foam Masking Tape

Q1® Premium Foam Masking Tape is a refinishing foam masking tape designed to protect door edges and gaps from overspray while providing a smooth edge reducing time to complete the job. Mask jambs and other apertures quickly and increase profitability.

Traditional Masking Tape vs. Foam Masking Tape

  • Traditional flat masking tape can leave paint lines when used inside apertures, or must be rolled in order to create a sort of soft edge.
  • Thanks to its construction, Q1® Premium Foam Masking Tape creates an edge faster than other classic jamb masking techniques. Also dust and other contaminants are sealed in, preventing them from damaging paint job. Refinishing foam masking tape can also be left in place during the final prep phase to help reduce compound and polish from entering jamb areas.

Soft edge foam masking tape: easy application

This Soft edge refinishing foam masking tape can be applied easily inside gaps and jambs with a soft pressure of the fingers. Thanks to its high conformability, the tape perfectly fits the apertures and leaves no leaks through which the paint could overspray. Forget paint bridging: refinishing foam masking tape will bring your job to a higher professional level.
Read more

  • Specially designed polyurethane foam structure
  • Highly absorbent to avoid any leaking and paint runs
  • Flexible
  • Easy/clean removal
  • Solvent resistant
  • Easy roll release in a box dispenser
  • Temperature rating 176° F. / 80° C.

Available Colour

  • White

  • Easy to shape on contours, mask and seal all jambs
  • Good adhesion to vehicle surfaces and able to withstand paint booth bake cycles
  • Prevents overspray from penetrating into the jamb
  • Improved productivity by reducing the time required to mask jambs with tape and masking paper.
  • Leaves no residue

Temperature Resistance

  • 176° F. / 80° C.
Part#Size – Pcs/ Case
SE0113mm X 50m – 1 roll / Box
DensityKh/m3UNE EN-ISO 84528 ± 2 29.30
HardnessKPaUNE EN-ISO 338614.5 ± 0.5 4.08
Def. Remaining%UNE EN-ISO 1586-A<5 4.90
High TensileKPaDIN 53571>150 228


Description: Adhesive thermo fusible- it melts with heat.Colour/Base: Transparent/block polymerSmell: Odourless at room temperature


Phisical constants of the product (viscosity)
180° C8000 ± 1000 mPas
170° C11000 ± 1500 mPas


Chemical resistance (*):
Water: excellentAcids and base: goodFats and oils: good
D. Aliphatic: poorD. Aromatics: poorD. Alcohols: good

Related Content

All articles loaded
No more articles to load

Subscribe to Newsletter