Q1® Premium Trim Masking

Q1® Premium Trim Masking

  • Q1® Premium Trim Masking is a trim masking tape designed to facilitate trim masking situations including: inset door handles, windscreen, side mouldings, taillight, sidelight and headlight units allowing complete paint coverage under the moulding while protecting the front of the moulding from paint overspray.
Trim masking tape is composed by a plastic strip on a self-adhesive tape and a flexible polyester band of 190 my and a width of 10mm, thermal class B (130°C/266°F). Thanks to its characteristics, the tape supports temperatures up to 110°C/230°F without leaving any residue. Trim masking tape is pre-cut every 38mm, allowing tearing it in short stripes that easily fit into the gaps of trim mouldings. Its flexibility guarantees perfect adhesion to irregular surfaces and lets it follow the tight curves of windscreens and lights. In addition, its adhesive formula resists moisture and solvents, making trim masking tape compatible with the most used types of paint used in professional car painting.
Read more

  • High Performance rubber-based adhesive
  • Specially treated paper backing
  • Temperature Resistance up to 230° F. / 110° C. (30 min.) 194° F. / 90° C. (60 min.)
  • Pre-perforated for easy tear off
  • Very flexible to follow contours and tight curves
  • Self-dispensing box
  • Easy lifting tab & tape

Available Colour

  • Sun Yellow

  • Resists moisture and solvents
  • Prevents paint bridging to moulding No bleed-through
  • Conforms to curved surfaces without lifting or tearing
  • One size fits all mouldings
  • Quick application, no cutting tool needed
  • Save time and labour cost of removing mouldings
  • Eliminate visible paint edge

Temperature Resistance

  • 230° F. / 110° C. (30 min.) 194° F. / 90° C. (60 min.)
Part# Size – Pcs/ Case
TT01 10mm hard tab X 10 m – 72 roll/ case
Properties Measuring Units Value Measuring method
Density g/m3 0.95 Following
Thickness um 8 microns Following
Tensile strenght machine direction N/mm2 70 Following
Tensile strenght transverse direction N/mm2 28 Following
Elongation at break machine direction % 422 Following
Elongation at break transverse direction % 893 Following
Dart drop g/um 3.45 Following
Temperature stability 105

Related Content

All articles loaded
No more articles to load

Subscribe to Newsletter