How to properly mask a car body for painting: tips and tricks.

Q1® Premium Trim Masking Tape

Use Q1® Trim Masking Tape to lift and mask rubber mouldings in one easy step. Insert and slide plastic tab behind rubber moulding and fix masking tape.

Q1® Trim masking tape is designed to be applied to inset door handles, windscreen, side mouldings. Thanks to its characteristics, it has perfect adhesion to irregular surfaces. Trim masking tape has pre-cut perforations for an easy tearing and fastest application.

 

Q1 Premium Masking Drop Film

Use Q1® Masking Drop Film to mask off wide areas with a single and fast application. The application can be done with the aid of masking tape, using it to fasten the film to the desired area.

Q1® Premium Masking Drop Film provides protection of the parts of the vehicle that require not to be painted and strong adherence of the paint to the film.

 

Q1® Premium Foam Masking Tape

Use Q1® Foam Masking Tape to protect door and bonnet gaps from overspray. It can be applied easily inside jambs and apertures with a soft pressure of the fingers, assuring a complete protection.

Q1® Premium Foam Masking Tape is specific for boot, bonnet and A Post applications. It has high conformability and ease of unrolling.

 

Q1® Premium Masking Tape

Use Q1® Premium Masking Tape to mask the surfaces near the area to paint, where other masking products cannot be applied. It is widely used also to fasten masking paper or masking film to the vehicle.

Q1® Premium Masking Tape is the perfect tool during masking preparation for painting work in oven during drying cycles. It provides instant adhesion to all vehicle surfaces and good holding power. Q1® Masking Tape is designed to curved surfaces without lifting or tearing.

 

Q1® Premium Protective Film

Use Q1® Protective Film to protect vehicles from paint overspray inside spray booths.

Q1® Premium Protective Film has excellent adhesion of both solvent and waterborne paints and its surface retains paint drops, preventing them from bleeding on the floor.

All Q1® masking solutions are resistant to temperature up to 110°C. (30 min) and leave no adhesive residue after removal.

You May Also Like

How to use automotive masking tape

Subscribe to newsletter

[]
1 Step 1
Name
Surname
Companyyour full name
Previous
Next

Share this page:

Subscribe to newsletter

[]
1 Step 1
Name
Surname
Companyyour full name
Previous
Next
Find a Distributor